Along with the rapid development of social economy, the requirements on pulverizing fineness by the clients from the pulverizing
industry are also increasingly improved. General Raymond mill has been fairly unable to meet
the demands of the market development. As a result, SCM series ultrafine grinding mill is developed.
Its powders’ fineness can be adjusted within a range from 325 to 2500 meshes and its disposable
fineness can reach D97≤5um which has ranked the leading level in the same trade and partial highest
fineness reaching 2500 meshes through repeated experiments test by the geoscientific research
institute. Because of its good performance, SCM win high praise from the users.
It features high efficiency and low energy consumption, with the capacity more than twice that of jet mills but the energy
consumption lower by 30%.
Automatic feedback with fast and stable conversion of finished products; intelligent control, saving labor costs directly.
Frequency-conversion control, convenient for the adjustment control, with the one-time finished products D97≤5μm.
The efficient vertical turbine powder classifier can achieve high efficiency, accurate cutting size and no spillover of coarse
The roller and ring are made of special material, so the durability can be several times higher.
The grinding chamber has no bearing screw, able to work stably free of vibration after balance treatment.
The efficient double powder collecting method of powder collectors and pulse dust collectors is able to achieve good effect
in dust collection, which is far higher than the international standard.
The optimized sound insulation room and muffler can effectively prevent the spread of equipment noise.
Each rotary table at each layer is driven by the electric motor through inputting power into the main
shaft by the speed reducer of the main engine. Three layers’ ring roller rolls and rotates in the
roller path of the grinding rings. When materials are uniformly fed into the center of the upper
rotary table, they are scattered to the circum of the circle under the action of centrifugal force
and fall into the roller path of the grinding rings and then punched, pressed, grinded and crushed
by the rolling mill and materials will afterwards fall into the second and third layers to be further
crushed through after the first layer crushing. Finally, the fine powder will become the finished
products by entering into the whirlwind powder collector along with airflow and via a discharge valve
at its bottom while the airflow with few fine dusts will be purified by the pulsed jet filter and
discharged through the fan and silencer.
|Model ||SCM800 ||SCM900 ||SCM1000 ||SCM1250 ||SCM1680 |
|Main motor ||Power ||75 ||45×2 ||132 ||185 ||315 |
|Analytical engine (FM motor) ||Power ||18.5 ||18.5 ||30 ||15x4 ||18.5×5 |
|Blower motor ||Power ||45 ||55 ||75 ||55×2 ||90×2 |
|Crusher ||Model ||PC400×600 ||PC400×600 ||PC400×600 ||PC600×800 ||PC600×800 |
|Power ||18.5 ||18.5 ||18.5 ||45 ||45 |
|Elevator ||Model ||TH-200 ||TH-200 ||TH-300 ||TH-300 ||TH-300 |
|Power ||3 ||3 ||4 ||5.5 ||7.5 |
|Vibrating feeder ||Model ||300×60×1.8 Φ159-1.8 ||300×60×1.8 Φ159-1.8 ||300×60×1.8 Φ159-1.8 ||400×80×2 Φ219-2 ||400×80×2.8 |
|Power ||1.5/3 ||1.5/3 ||1.5/3 ||1.5/3 ||2.2 |
|Discharge screw conveyor ||Model ||LS219-4.5/LS219-3 ||LS219-5.8 ||LS219-6.9/LS219-5 ||LS219-5 ||LS273-8.6 |
|Power ||3 ||3 ||4 ||3×2 ||5.5×2 |
|Discharge valve ||Model ||ZJD-200 ||ZJD-200 |
|ZJD-250 ||ZJD-300 |
|Power || 0.75 ||0.75 + 1.1 ||0.75+ 1.1 ||1.1 ||1.5+0.75 |
|Pulse dust collectors ||Model ||DMC120/DMC16 ||DMC16 ||LDMC25 ||LDMC45 ||LDMC400×2 |
|Air compressor ||Model ||KSH150D/LG1.5-8 ||KSH240D/LG2.4-8 ||KSH300D/LG3.6-8 ||LG6.2-8 ||LG10-8 |
|Power ||11 ||15 ||22 ||37 ||55 |